🎉 Up to 70% Off Selected ItemsShop Sale
CleanFreak® 120 PSI Heated Carpet Extractor w/ 12" Wand & 25' Hose
This CleanFreak heated carpet extractor uses hot water and an adjustable glide wand to remove as much dirt from your carpets as mechanically possible. The hot water severs the bond between the dirt and the carpet fibers, allowing it to be recovered by the drag wand. The single jet wand has a #02 spray jet, and also has an adjustable glide that consistently recovers 30% more solution on each pass, no matter the angle. The wand does breakdown into 2 pieces via a button lock that snaps the two pieces into place for use. The solution line has a 1/8" quick disconnect fitting on it, so the wand does truly come fully apart into two separate pieces.
Not only do you get great recovery power with this extractor, but you also get unbelievable heat! The dual 1000 watt heaters will provide a maximum water temperature of 210° F. Between the heater, pump, and vacuum, you'll need to power the unit with electrical outlets on 2 separate circuit breakers. The machine itself has a built in circuit locator that will tell you if you're on 2 separate circuits or not. Simply press the circuit locator button when plugged into 2 separate outlets, and if the light turns on, you know you're good to start extracting. If not, you'll need to search for another outlet.
This machine is the big brother to the 120 PSI non-heated carpet cleaning extractor, and the little brother to the 500 PSI heated carpet extractor. These, plus many more can be found in our box style carpet extractors department. If you're looking for complete package that pairs a machine with the correct chemicals and accessories, please take a look at our carpet cleaning package deals.
To make sure you're 100% ready for the task at hand, we recommend you looking through our carpet cleaning chemicals, power heads, and upholstery tools departments to make sure you are properly prepared.
*Please Note: Do not use extension cords with this machine unless they are a heavier gauge than the ones attached to the unit.
Not only do you get great recovery power with this extractor, but you also get unbelievable heat! The dual 1000 watt heaters will provide a maximum water temperature of 210° F. Between the heater, pump, and vacuum, you'll need to power the unit with electrical outlets on 2 separate circuit breakers. The machine itself has a built in circuit locator that will tell you if you're on 2 separate circuits or not. Simply press the circuit locator button when plugged into 2 separate outlets, and if the light turns on, you know you're good to start extracting. If not, you'll need to search for another outlet.
This machine is the big brother to the 120 PSI non-heated carpet cleaning extractor, and the little brother to the 500 PSI heated carpet extractor. These, plus many more can be found in our box style carpet extractors department. If you're looking for complete package that pairs a machine with the correct chemicals and accessories, please take a look at our carpet cleaning package deals.
To make sure you're 100% ready for the task at hand, we recommend you looking through our carpet cleaning chemicals, power heads, and upholstery tools departments to make sure you are properly prepared.
*Please Note: Do not use extension cords with this machine unless they are a heavier gauge than the ones attached to the unit.
Features
- Dual 1000 watt heaters provide outstanding heating power for hot water extracting.
- 12" adjustable glide drag wand recovers 30% more solution than standard wands.
- 2 power cords (black - vacs & pump | yellow - heaters) allows you to only run the vac motors & pump if needed.
- Side dump valve and back dump hose allows you to dump your solution in the most convenient place.
- Remove 2 bolts to tilt the tank back to easily access the interior where the pump, motors & heaters are located.
- Extremely portable, weighing only 95 pounds, this hot water extractor allows the user to access stairways and upper levels effortlessly.
- Comes backed from a USA company with a 1 year warranty the motors & parts, and 90 days on labor.
Caring for Your Carpet Extractor
Your carpet extractor should be winterized between uses if it is to be exposed to freezing temperatures. To winterize your machine, pour 1/2 gallon of windshield wiper fluid into the empty solution tank. Run the pump until fluid flows through the tank. Then run 1 gallon of water through the extractor before the next use.$759.50
Original: $2,169.99
-65%CleanFreak® 120 PSI Heated Carpet Extractor w/ 12" Wand & 25' Hose—
$2,169.99
$759.50Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
This CleanFreak heated carpet extractor uses hot water and an adjustable glide wand to remove as much dirt from your carpets as mechanically possible. The hot water severs the bond between the dirt and the carpet fibers, allowing it to be recovered by the drag wand. The single jet wand has a #02 spray jet, and also has an adjustable glide that consistently recovers 30% more solution on each pass, no matter the angle. The wand does breakdown into 2 pieces via a button lock that snaps the two pieces into place for use. The solution line has a 1/8" quick disconnect fitting on it, so the wand does truly come fully apart into two separate pieces.
Not only do you get great recovery power with this extractor, but you also get unbelievable heat! The dual 1000 watt heaters will provide a maximum water temperature of 210° F. Between the heater, pump, and vacuum, you'll need to power the unit with electrical outlets on 2 separate circuit breakers. The machine itself has a built in circuit locator that will tell you if you're on 2 separate circuits or not. Simply press the circuit locator button when plugged into 2 separate outlets, and if the light turns on, you know you're good to start extracting. If not, you'll need to search for another outlet.
This machine is the big brother to the 120 PSI non-heated carpet cleaning extractor, and the little brother to the 500 PSI heated carpet extractor. These, plus many more can be found in our box style carpet extractors department. If you're looking for complete package that pairs a machine with the correct chemicals and accessories, please take a look at our carpet cleaning package deals.
To make sure you're 100% ready for the task at hand, we recommend you looking through our carpet cleaning chemicals, power heads, and upholstery tools departments to make sure you are properly prepared.
*Please Note: Do not use extension cords with this machine unless they are a heavier gauge than the ones attached to the unit.
Not only do you get great recovery power with this extractor, but you also get unbelievable heat! The dual 1000 watt heaters will provide a maximum water temperature of 210° F. Between the heater, pump, and vacuum, you'll need to power the unit with electrical outlets on 2 separate circuit breakers. The machine itself has a built in circuit locator that will tell you if you're on 2 separate circuits or not. Simply press the circuit locator button when plugged into 2 separate outlets, and if the light turns on, you know you're good to start extracting. If not, you'll need to search for another outlet.
This machine is the big brother to the 120 PSI non-heated carpet cleaning extractor, and the little brother to the 500 PSI heated carpet extractor. These, plus many more can be found in our box style carpet extractors department. If you're looking for complete package that pairs a machine with the correct chemicals and accessories, please take a look at our carpet cleaning package deals.
To make sure you're 100% ready for the task at hand, we recommend you looking through our carpet cleaning chemicals, power heads, and upholstery tools departments to make sure you are properly prepared.
*Please Note: Do not use extension cords with this machine unless they are a heavier gauge than the ones attached to the unit.
Features
- Dual 1000 watt heaters provide outstanding heating power for hot water extracting.
- 12" adjustable glide drag wand recovers 30% more solution than standard wands.
- 2 power cords (black - vacs & pump | yellow - heaters) allows you to only run the vac motors & pump if needed.
- Side dump valve and back dump hose allows you to dump your solution in the most convenient place.
- Remove 2 bolts to tilt the tank back to easily access the interior where the pump, motors & heaters are located.
- Extremely portable, weighing only 95 pounds, this hot water extractor allows the user to access stairways and upper levels effortlessly.
- Comes backed from a USA company with a 1 year warranty the motors & parts, and 90 days on labor.
